Connecting To A Wireless Network Using Windows Vista - D-Link DIR-456 User Manual

Section 5 - Connecting to a Wireless Network

Connecting to a Wireless Network Using Windows Vista

It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before
configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or
passphrase being used.
1. Open the Windows Vista
on the wireless computer icon in the system tray in the
lower right corner of the screen. Select Connect to a
network.
2. The utility will display any available wireless networks
in your area.
Highlight the wireless network (SSID) you would like to
connect to and click Connect.
If you get a good signal but cannot access the Internet,
check your TCP/IP settings for your wireless adapter.
Refer to the Networking Basics section in this manual
for more information.
D-Link DIR-456 User Manual
®
Wireless Utility by right-clicking
®
73