Table Of Contents; Introduction - Husqvarna S 36 Operator's Manual

INTRODUCTION............................................................ 2
SAFETY..........................................................................5
INSTALLATION.............................................................. 7
OPERATION...................................................................7
MAINTENANCE..............................................................9
Product description
Dear Customer,
Thank you for choosing Husqvarna as your supplier.
We hope that this product powered by Aztec/Kawasaki
and powered by Aztec/Honda will be to your satisfaction
and meet your expectations.
Please read the safety regulations and the complete
operator's manual carefully before using the dust
extractor. This manual is only for the dust extractor S 36
Propane / T 8600 Propane. Husqvarna will not be held
Intended use
The dust extractor S 36 Propane / T 8600 Propane is
intended for commercial use.
2
Contents

INTRODUCTION

WARNING
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects
or other reproductive harm.
TROUBLESHOOTING..................................................11
TRANSPORTATION AND STORAGE......................... 11
TECHNICAL DATA.......................................................12
SERVICE...................................................................... 13
WARRANTY................................................................. 14
responsible if the dust extractor is used for other
applications or has been used in ways other than those
outlined in this operator's manual.
Make sure that you read and understand the instructions
for the main product to ensure that you know what
personal equipment to wear, what safety equipment to
use and how to work in a safe mode.
All spare parts used for the dust extractor S 36
Propane / T 8600 Propane must be those specified by
Husqvarna. Spare parts for the engine are specified by
the engine manufacturer.
The product is designed for vacuuming and separating
dry, non-combustible dust with an explosion limit value
3
of >0.1mg/m .
518 - 003 - 07.06.2018