Download Print this page
Technotherm ISP Design S 350 Installation And Technical Manual

Technotherm ISP Design S 350 Installation And Technical Manual

Isp-design & isp-design s (mirror) with receiver rf

Advertisement

Quick Links

Installation and technical manual
ISP-Design & ISP –Design S (Mirror) with receiver „RF"
ISP-Design 350 – 1200
ISP-Design S 350 - 750
Nr. 911 360 661
Edition: 02/17
2
GB
3

Advertisement

loading

Summary of Contents for Technotherm ISP Design S 350

  • Page 1 Installation and technical manual ISP-Design & ISP –Design S (Mirror) with receiver „RF“ ISP-Design 350 – 1200 ISP-Design S 350 - 750 Nr. 911 360 661 Edition: 02/17...
  • Page 2 Manual ISP-Design 1. Important Safety instructions • People (including children) who are limited in their physical, sensory, or mental capacities should not use this device at any time. Furthermore do not handle this instrument if you do not possess the necessary experience and knowledge to do so. This device should only be handled under the supervision of a qualified person and after a thorough introduction.
  • Page 3 Manual ISP-Design WARNING - THIS APPLIANCE MUST BE GROUNDED We hope you enjoy using infrared radiating panel. ISP-Design W (white glas plate) ISP-Design B (black glas plate) ISP- Design M (mokka glas plate) ISP-Design S (Mirror glas plate) Prior to commissioning, please inform yourself about proper installation, commissioning, operation and maintenance.
  • Page 4: All Models

    690 mm A [mm] C [mm] D [mm] width incl. RF ISP Design 350 ISP Design S 350 ISP Design 450 ISP Design 600 A/2 = 312 D/2 = 312 ISP Design S 600 ISP Design 750 A/2 = 462...
  • Page 5: Electrical Connection

    It is recommended that the control of the ISP heating panels by an external room thermostat from TECHNOTHERM (eg. radio receiver TPF or with the digital radio transmitter TBF. In addition, the ISP heating panels are equipped with a limiting thermostat to ensure their safe...
  • Page 6 Manual ISP-Design Connecting the recipient (only with the "RH" models) Press on the receiver for more than 3 seconds the button until the indicator light begins to flash. Then attach the transmitter in configuration mode (see manual transmitter). If the indicator light on the receiver stops flashing, the two products are assigned.
  • Page 7 When switching on the installation (1), you have 4 seconds to press 3 times the receiver button (2). The LED flashes (3): 2 times for X2D, 3 times for X3D. TECHNOTHERM support: Fon: +49 (0) 911-93 78 32 10 Errors and technical modifications reserved! Lucht LHZ Elektroheizung GmbH &...
  • Page 8 Manual ISP-Design web: www.technotherm.de Edition: 02/17...

This manual is also suitable for:

Isp design 45Isp design 350Isp design 600Isp design s 600Isp design 750Isp design s 750 ... Show all