Electric combination heaters tt-ks mobile /castors (12 pages)
Summary of Contents for Technotherm ISP Design S 350
Page 1
Installation and technical manual ISP-Design & ISP –Design S (Mirror) with receiver „RF“ ISP-Design 350 – 1200 ISP-Design S 350 - 750 Nr. 911 360 661 Edition: 02/17...
Page 2
Manual ISP-Design 1. Important Safety instructions • People (including children) who are limited in their physical, sensory, or mental capacities should not use this device at any time. Furthermore do not handle this instrument if you do not possess the necessary experience and knowledge to do so. This device should only be handled under the supervision of a qualified person and after a thorough introduction.
Page 3
Manual ISP-Design WARNING - THIS APPLIANCE MUST BE GROUNDED We hope you enjoy using infrared radiating panel. ISP-Design W (white glas plate) ISP-Design B (black glas plate) ISP- Design M (mokka glas plate) ISP-Design S (Mirror glas plate) Prior to commissioning, please inform yourself about proper installation, commissioning, operation and maintenance.
It is recommended that the control of the ISP heating panels by an external room thermostat from TECHNOTHERM (eg. radio receiver TPF or with the digital radio transmitter TBF. In addition, the ISP heating panels are equipped with a limiting thermostat to ensure their safe...
Page 6
Manual ISP-Design Connecting the recipient (only with the "RH" models) Press on the receiver for more than 3 seconds the button until the indicator light begins to flash. Then attach the transmitter in configuration mode (see manual transmitter). If the indicator light on the receiver stops flashing, the two products are assigned.
Page 7
When switching on the installation (1), you have 4 seconds to press 3 times the receiver button (2). The LED flashes (3): 2 times for X2D, 3 times for X3D. TECHNOTHERM support: Fon: +49 (0) 911-93 78 32 10 Errors and technical modifications reserved! Lucht LHZ Elektroheizung GmbH &...