Care, Maintenance, Accessories And Disposal - Verity Medical NeuroTrac Continence Operation Manual

Care, Maintenance,
Accessories and Disposal
WARNING! Only medically approved accessories should be used!
CONTROL UNIT
* Wipe the surface once a week with a damp cloth or antiseptic wipe /
detergent wipe.
* Do not use cleaning sprays or alcohol based cleaning solutions.
* Control unit disposal: must be disposed of in compliance with national
regulatory requirements.
ACCESSORIES
Battery:
* To change the battery, open the battery door on the rear of the control
unit by pressing down on the raised rib pattern just below the belt clip.
Lift the battery out of the compartment. This is very easy and can be
done by the user.
* Check periodically for any discharge from the battery
* Remove battery completely from unit if not in use for any
extended period of time.
* Low battery indicator of 6.9 volts shown on LCD display. When
flashing change battery for a new one
* Please use 9 Volt alkaline battery (IEC code: 6LR61, size: PP3).
* Battery disposal: must be disposed of in compliance with national
regulatory requirements.
Lead Wires:
* The lead wires should be handled carefully and never stretched, as
this can cause the stimulation to function below normal standards or
not at all
* Examine lead wires before each treatment for loose connections or
damage
* Avoid stretching and twisting the lead wires
* Store the lead wires carefully after each use
* Lead wires Disposal: must be disposed of in compliance with national
regulatory requirements.
NeuroTrac Continence Operation Manual
®
14