Table of Contents
Advertisement
4358-4805B US onBoard 35
11/22/10
4.
5.
6.
a.
17
3:26 PM
Page 19
Unbuckle Harness
Press red button. Pull buckle
tongues out. Place harness
straps over sides of child
restraint.
Place Child in Child
Restraint
Place the child's bottom and
back flat against the child
restraint. This will increase
comfort and allow the
harness straps to be properly
tightened.
Check Buckle
Position
Determine which of the
available buckle positions
will be comfortable and
provide a snug fit for
your child.
To Change Buckle
Position
Remove child. From under
the seat, insert buckle's
metal retainer up through
the carrier and pad.
b.
Choose new location and
push the metal clip
through pad and carrier.
Make sure the buckle is
facing out.
c.
Pull on the buckle to
check to make sure
buckle's metal clip is
completely inserted
through the pad and
carrier.
Failure to reinstall the harness system correctly
can result in serious injury or death.
Buckle Placement for
Small Infants
d.
Choose the slot closest to
the back of the restraint.
Push metal clip through
the pad and carrier. Make
sure buckle is facing out.
18
continued on next page.
Advertisement
Table of Contents
