Maintenance And Operation; Waste Treatment - Nano Temper Monolith NT.115 User Manual

Maintenance and Operation

Pay attention to the instrument operating environment and always keep it clean so that the
instrument can be used in a stable condition over a long period. Do not place anything on top of the
instrument.
Cleaning the Monolith NT.115 instrument
Switch off the instrument and remove the power plug of the external power supply from the electrical
socket. Only use a dry cloth or a cloth dampened with water for cleaning the instrument.
CAUTION Do not use ethanol or other types of organic solvents to clean the instrument as they may
remove the instrument paint.
Transporting the Monolith NT.115 instrument
Switch off the instrument and remove the power plug of the external power supply from the electrical
socket. Do not carry the instrument alone, two people are needed for transportation.
CAUTION The weight of the Monolith NT.115 instrument is approx. 24 kg, do not move the
instrument alone, two persons required for transport/movement. If you move the instrument alone it
poses a risk of personal injury or damage to the instrument.
Malfunction
In case of a malfunction switch off the Monolith NT.115 instrument and wait for five minutes, then
switch on the instrument again. If the malfunction persists switch off the device, unplug the power
cable and contact the NanoTemper Technologies customer support.
Repairing the Monolith NT.115 instrument
Do not try to repair the instrument. Contact the NanoTemper Technologies customer support for
instrument repairs.
CAUTION The manual opening of the instrument is not permitted. Manual opening poses a risk of
personal injury or damage to the instrument. Contact NanoTemper Technologies customer support
staff if you need to open the instrument.

Waste Treatment

Waste treatment is your own responsibility. You must hand the instrument to a company specialized
in waste recovery. Do not dispose the instrument in a litter bin or at a public waste disposable site.
For detailed information please contact the NanoTemper Technologies service.
13