Texas Instruments TI-nspire Getting Started page 113

Hide thumbs Also See for TI-nspire:
Table of Contents

Advertisement

Shown
Message and Description
on:
cleared for the new operating system. Files can be moved to a
computer for storage to free the necessary space.
Sending
"Receiver must change batteries before upgrading the OS."
handheld
This message indicates that the batteries in the receiving
handheld need to be replaced. Send the OS Upgrade once the
batteries are replaced.
Sending
handheld
This message indicates that the receiving handheld has a newer
OS version than the one being transmitted. You cannot
downgrade an OS.
Sending
handheld
This message indicates that the receiving handheld refuses the
upgrade.
Sending
handheld
This message indicates that the transfer is complete and it is safe
to unplug the cable from the sending handheld.
Sending
handheld
This message, along with a progress bar, is displayed while the
OS Upgrade is being transferred.
Both
handhelds
The sending and/or receiving handheld is not properly connected.
Reinsert the cable into each handheld, and then try the
transmission again.
Receiving
"You are receiving an OS Upgrade. Unsaved changes will be
"Receiver has a newer OS and cannot
"Upgrade not accepted by receiver."
"OS has been transferred.
You can now unplug."
"Sending OS. Do not unplug cable."
"Transfer failed. Check cable and try again."
load this OS."
OK
OK
OK
OK
Updating the Handheld Operating System 113

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ti-nspire cas handheld

Table of Contents