Mitsubishi MOTORS CARISMA 1996 Service Bulletin page 158

www.WorkshopManuals.co.uk
MH062469
MB990560
Purchased from www.WorkshopManuals.co.uk
FRONT AXLE - Drive Shaft
DISASSEMBLY SERVICE POINTS
A T.J. CASE/SPIDER ASSEMBLY REMOVAL
" " " " ! ! ! !
(1) Using the water pump pliers, etc., unstake the flange
area of T.J. case and T.J. boot (at 3 places).
(2) Remove the T.J. case.
11U0092
(3) Using the special tool, remove the spider assembly.
(4) Wipe off grease from the spider assembly and the inside
of the T.J. case.
(5) Always clean the spider assembly when the grease
contains water or foreign material.
Caution
1. Do not disassemble the spider assembly.
2. Use care in handling so as not to damage the
drive shaft.
A11U0090
B T.J. BOOT REMOVAL
" " " " ! ! ! !
(1) Wipe off grease from the shaft spline.
(2) When reusing the T.J. boot, wrap plastic tape around the
shaft spline to avoid damaging the boot.
(3) Using the special tool, remove the T.J. boot.
MB990560
A11U0089
C DYNAMIC DAMPER REMOVAL
" " " " ! ! ! !
A11U0087
<Added>
26-15
7