Upper ( N E E D L E ) T H R E A - Brother VX880 How To Use And Enjoy Manual

(
Upper (Needle) Thread I
Before threading, raise presser foot and turn
balance wheel toward you t o raise thread
take-up lever t o its highest position.
Then raise spool pin and place thread spool
on the pin.
1. Pass thread through the both of thread
guides from rear t o front.
2. Bring thread down and up through
upper thread tension dial from right t o
left so that thread picks u p the thread
check spring. With holding thread as
illustrated, pull u p thread and deliver
into the eye in tension disc.
3. Thread take-up lever b y guiding thread
t o back o f lever and around t o your
left. Bring thread through slit b y
pulling i t toward y o u and into eyelet.
4. Bring down and pass through the thread
guard and guides.
5. Thread needle from front
to
back and
draw the thread out about
2
inches (5
cm).
NOTE:
I F THE THREADING ORDER IS N O T
CORRECT, THREAD BREAKAGE,
STITCH SKIPPING A N D WRINKLING O F
FABRIC W I L L OCCUR.