Straight Stitching; How T O Start Sewing; How To Change Sewing Direction - Brother VX880 How To Use And Enjoy Manual

STITCH LENGTH
STITCH WIDTH
NEEDLE POSITION
2
PRESSER FOOT
NEEDLE
PRESSURE ADJUSTER
Straight Stitching
: F - 4
: 0
: M. L. R. (Twin needle sewing, always
set at M)
:
Straight or Zigzag
: Single
: According to the material
HOW T O START SEWING
1. Raise needle t o its highest position
and l i f t presser f o o t .
2. Pull u p lower thread b y turning t h e
balance wheel t o w a r d y o u and place
b o t h upper and lower thread t o t h e
left.
3.
Place material under presser f o o t and
position needle
318
inch ( 1 c m ) f r o m
material edge.
4. Lower presser f o o t .
5. F o r reverse sewing, push reverse sewing
b u t t o n as far as
it
w i l l allow. Reverse
sewing is used where reinforcement is
needed.
6.
Release reverse sewlng b u t t o n and start
sewing i n f o r w a r d direction.
NOTE:
Use straight stitch f o o t when
sewing light o r elastic t y p e materials
w i t h straight stitch.
HOW TO CHANGE SEWING DIRECTION
1. Stop machine at the turning p o i n t while
the needle is i n the material.
2. Raise the presser f o o t and t u r n the
material t o the new direction while
the needle acts as the axis.
3.
Lower the presser f o o t and start sewing
i n new direction.
NOTE: I n case of t w i n needle sewing,
raise the needle at the turnlng
point.