Pentair ONGA INTELLIMASTER INJ-4500L 075 User Quick Manual page 4

SETTING
1> Switching to Constant Pressure or Constant Speed
2> Setting the pressure
1
Press or
button for 2 seconds.
Changing to Constant Speed(MANUAL OPERATION MODE)
• To set to MANUAL OPERATION MODE, press down on
the STOP button for 3 seconds. The AUTO indication will
disappear. In MANUAL OPERATION MODE, press the
and once the indication is on Hz, change the constant speed
required by pressing either the
run button once the Hz is selected.
Changing to Constant Pressure(AUTO OPERATION MODE)
• To set to AUTO OPERATION MODE, press down on the
STOP button for 3 seconds. The AUTO indication will
appear. In AUTO OPERATION MODE, the pump will operate
according to the set pressure.
*NOTE: THIS IS THE CURRENT DEFAULT SETTING
2
Press or
button to set the desired pressure.
or and press the
3
4
Press button to
complete the pressure setting.