Use Of The Cooking Hob - Smeg AS28I96L Instructions For Installation And Use Manual

Smeg range instructions for installation and use
Table of Contents

Advertisement

Instructions for the user

5. USE OF THE COOKING HOB

5.1 Burner knob
To light the flame, press and turn the
knob anticlockwise to the large flame
symbol. Adjust the flame by turning the
knob to the area comprised between
maximum and minimum marks. To
turn off, set the knob to either
5.2 Lighting the burners
Before lighting the burners make sure that the flame cap crowns are
properly fitted into their seats and equipped with the corresponding caps,
and check that niche A is aligned with pin B.
Grid C (available in some models) is intended for use with "wok" pans.
Each knob corresponds to the burner indicated. The appliance is
equipped with an electronic lighting device. To light the burners, press
and turn the knob anticlockwise to the large flame symbol. Keep the
knob pressed for about 2 seconds to let the thermocouple heat up. If the
burner turns off when the knob is released, it means that the
thermocouple isn't hot enough. Repeat ignition and keep the knob
pressed longer.
If the burners turn off accidentally, a safety device will trip after about 20
seconds to cut off gas flow (even with the gas tap open).
or 0.
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents