Lectrosonics SRC-941 Quick Start Manual
Camera slot dual uhf receiver, digital hybrid wireless technology
Hide thumbs
Also See for SRC-941:
- Instruction manual (28 pages) ,
- Instruction manual (28 pages) ,
- Instruction manual (36 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Q
uick
S
tart
G
uide
Camera Slot Dual UHF Receiver
SRC-941
Fill in for your records:
Serial Number:
Purchase Date:
Digital Hybrid Wireless
U.S. Patent 7,225,135
This guide is intended to assist with
initial setup and operation of your
Lectrosonics product.
For a detailed user manual, down-
load the most current
version at:
www.lectrosonics.com/manuals
Technology
®
23 May 2018
Advertisement
Table of Contents
Related Manuals for Lectrosonics SRC-941
Summary of Contents for Lectrosonics SRC-941
- Page 1 Camera Slot Dual UHF Receiver SRC-941 Digital Hybrid Wireless Technology ® U.S. Patent 7,225,135 Fill in for your records: This guide is intended to assist with initial setup and operation of your Serial Number: Lectrosonics product. For a detailed user manual, down-...
-
Page 2: Digital Hybrid Wireless
Digital Hybrid Wireless ® The Lectrosonics Digital Hybrid Wireless uses innovative technology to ® combine the advantages of digital audio with the advantages of analog RF transmission. The result delivers the superior sound quality of a digital system and the excellent range of an analog system. -
Page 3: Quick Start Summary
Adjust receiver output level as needed for the camera or mixer input level desired (see pages 8-9). IMPORTANT: Performance will be degraded if FREQ. Receiver 2 is set 4.2 to 4.8 MHz higher than Receiver 1. The LCD will also flash WARNING this message periodically. www.lectrosonics.com... -
Page 4: Front Panel Controls And Functions
This allows the receiver to power up and down as the camera or external sup- ply is turned on and off. Press the PWR/BACK button from the Main Window to briefly display the external power voltage. LECTROSONICS, INC. -
Page 5: Installing Rear Panel Adapters
Connections between the panel and main circuit board are made via miniature mating connectors. Align the mating connectors and slide the panel straight into the housing until the screw holes align with the housing. www.lectrosonics.com... -
Page 6: Battery Adapters
The battery sled adapters do not include charging circuitry. Batteries must be charged with their respective chargers. The adapters include an integral circuit that automatically selects between the battery and the external source, whichever delivers the highest voltage. LECTROSONICS, INC. -
Page 7: External Power Supply
Pilot Tone Indicator Receiver 1 Receiver 2 Audio Transmitter RF Level RF Level Level Battery Level Pressing the MENU/SEL button accesses the menus and screens for setting up the receiver and searching for clear frequency channels. www.lectrosonics.com... -
Page 8: Navigating The Lcd
Navigating the LCD Note: Press the BACK button from the Main Window to briefly display the external power supply voltage. LECTROSONICS, INC. - Page 9 www.lectrosonics.com...
-
Page 10: Scanning For Clear Frequencies
Set your transmitter to the same frequency as shown on the receiver display, turn the transmitter on and verify that a strong RF signal is present. LECTROSONICS, INC. -
Page 11: Mounting And Orientation
Fig. 1 STRONG SIGNAL Fig. 2 STRONG SIGNAL Fig. 3 WEAK SIGNAL Fig. 4 WEAKEST SIGNAL www.lectrosonics.com... -
Page 12: Limited One Year Warranty
This warranty does not apply to used or demonstrator equipment. Should any defect develop, Lectrosonics, Inc. will, at our option, repair or replace any defective parts without charge for either parts or labor. If Lectrosonics, Inc. cannot correct the defect in your equipment, it will be replaced at no charge with a similar new item.
Need help?
Do you have a question about the SRC-941 and is the answer not in the manual?
Questions and answers