Table of Contents
Advertisement
Sound settings
Sound settings is where you can configure ringtones and key
tones (keypad tones). Selecting a different ringtone than those
of your neighbors can help distinguish your phone from other
incoming calls. Key tones provide audible cues when pressing
keypad buttons.
Tap Menu > Basic > Sound to navigate to the Sound
Settings screen.
Ringtones:
1. Tap Ringtones on the Sound Settings screen
2. Tap the desired line or select Common to change the
ringtone for all lines
3. Tap the desired ringtone and then Save to accept
the change
Key tones:
1. Tap Key Tone on the Sound Settings screen
2. Tap the On or Off radio button
3. Tap Save to accept the change
Call volume
To adjust call volume, press the
on an active call.
Ringer volume
To adjust the ringer volume, press the
when the phone is inactive.
Bluetooth headset setup
The T49G supports Bluetooth for wireless headset connectivity.
You can pair as many Bluetooth devices as you like, but only
one headset can be connected at a time.
To pair your Bluetooth headset:
1. From the Basic Settings screen, tap Bluetooth
2. Tap the On radio button
Note: You can also swipe down from the top of the screen to
enter the control center and toggle Bluetooth on.
The T49G desk phone will automatically scan for nearby
Bluetooth devices. If you have not previously paired this
headset, follow the pairing instructions that came with your
Bluetooth device.
User guide
Volume Key while
Volume Key
12
Advertisement
Table of Contents
