Table of Contents
Advertisement
To set time and date format preferences:
1. From Basic Settings, tap Time & Date, then tap Time
& Date Format
2. Tap the Date Format field and select your preferred format
in the pop-up dialog box
3. Tap the Time Format field, select 12- or 24-hour format and
tap Save
Display settings
There are three options for personalizing the display settings
of your T49G IP desk phone. Tap Menu > Basic > Display to
navigate to the Display Settings screen.
Backlight
Set the brightness of your touch-screen display.
Wallpaper
Personalize the background color of your touch screen.
Screen saver mode
Configure your screen to automatically dim or display time and
date after the phone has been inactive for a predetermined
amount of time. You can stop the screen saver and return to
the idle screen at any time by touching the screen or pressing
any key on the phone.
Backlight
There are two options for setting backlight preferences:
• Active Backlight Intensity—sets the brightness of the touch
screen when the phone is active. Brightness levels go from 1
to 10, with 10 being the brightest setting
• Inactive Backlight Intensity—enables low-light mode when
the phone is inactive for a designated period. You can
configure the amount of time the phone must be inactive
before switching to low-light mode. You can also turn off the
backlight completely when inactive
To configure backlight settings:
1. From Display Settings, tap Backlight
2. Drag the Active Backlight Intensity slider to your preferred
screen brightness
3. Tap the Inactive Backlight Intensity field to open the
options dialog box
4. Tap to select the desired value
5. Tap the Backlight Time field
6. Tap to select the amount of time your phone must
be inactive before switching to inactive mode.
Tap
Save to accept the changes
User guide
10
Advertisement
Table of Contents
