Table of Contents
Advertisement
■ To set Hyper Clear Voice → p.14
■ To switch a voice/videophone call during a
call → p.5
■ To put the current voice/videophone call
on hold → p.18
■ To switch between the FOMA terminal and
Bluetooth device
r (1 second or longer)
■ When 2in1 is in Dual mode
The Outgoing number selection screen appears.
Select a phone number.
To end the call, press y
3
N
<Voice call>
The Power saver mode is activated if you do not
execute key operations for 15 seconds during a
call.
<Videophone>
Videophone using the rear camera is not
available.
If you make a videophone call to an emergency
number (110, 119 or 118) from the FOMA
terminal, the call automatically changes to a voice
call.
You cannot receive i-mode mail or MessageR/F
during a videophone call (you can receive SMS).
Received mail is stored at the i-mode center and
can be retrieved using "Check new messages"
after the videophone call.
During battery charge, if the videophone call and
1Seg recording are running simultaneously, the
camera-off message may appear and the Camera
may be turned off automatically depending on the
FOMA terminal temperature. The substitute image
appears on the other party's screen.
Digital communications charges apply when the
substitute image is displayed during a videophone
call.
Videophone
You can use the videophone call function
between terminals that support the DOCOMO
videophone system.
DOCOMO's Videophone is compliant with the
3G-324M*2 international standard established
by the 3GPP*1 (the 3rd Generation Partnership
Project that sets standards for 3rd generation
mobile communications systems). Connections
with videophones using different standards
cannot be made.
*1: 3GPP (3rd Generation Partnership Project)
A regional standardization body established to
develop commonly applied technical
specifications for 3rd-generation mobile
communications systems (IMT-2000).
*2: 3G-324M
An international standard for 3rd-generation
mobile videophones.
■Guide to the videophone screen
1
3
4
①Main screen (Camera image of the other party
is displayed by default)
②Sub-screen (Your own camera image is
displayed by default)
③Last call duration
④Settings
: Hyper Clear Voice (Low/High)
: Voice being transmitted/Transmission
error
: Video being transmitted/Transmission
error
: Camera image/Substitute image/
Chara-den being transmitted
: Handsfree ON/OFF
: Muting
: Visual check in progress
: Photo mode (Portrait)
: Key operation mode (DTMF
*2
mode
/Whole action mode
action mode
*1 : You cannot change the Photo mode.
*2 : "Send DTMF tone/DTMF tone OFF"→ p.4
*3 : "Using Chara-den"→ p.23
Continued on next page
2
*1
*3
/Part
*3
)
3
Advertisement
Table of Contents
