Table of Contents
Advertisement
N
If you have subscribed to the Call waiting, Voice
mail or Call forwarding service and you activate
"Set in-call arrival" and set "Incoming Call Mng" to
"Answer", you will hear a short double beep
("bibip") when you receive a call during a call.
• If you subscribe to the Voice Mail or Call
Forwarding service, you can answer a call after
ending the current call.
• If you subscribe to the Call Waiting service, you
can answer a voice call after putting the current
call on hold, and you can answer a videophone
call after ending the current call.
You can set the operation for calls from callers not
stored in the phonebook.
You can set restrictions for each phone number
stored in the phonebook.
<Videophone>
You can also answer a call by pressing
o (V.phone).
It may take a few seconds to switch from the
camera image to the substitute image (Chara-
den) depending on the Chara-den.
When the Other Party
Switches a Voice/Videophone
Call
When you receive a voice/videophone call, the other
party can switch between voice call and videophone
call.
The receiver cannot switch the call.
To switch calls, the receiver needs to set "Ntfy
switch-mode" beforehand. → p.24
You can use this function with terminals compatible
with voice call/videophone call switch.
<Example: When the other party switched a voice call
to a videophone call>
In-call screen (p.2) The other
1
party switches to a videophone
call "YES"
During switching, a screen appears indicating
that the calls are being switched, and voice
announcement is played.
When a voice call is switched to a videophone
call, the camera image is sent to the other party.
16
■ To send substitute image to the other
party
"NO"
■ When the other party switches a
videophone call to a voice call
Videophone in-call screen (p.2) The other
party switches to a voice call
The videophone call is switched to the voice call.
Using the Dial Keys to
Answer a Call
Turn off the ring tone or answer an incoming call
quickly.
i "Settings/Service"
1
"Incoming call" "Answer setting"
Select any item:
Any key
answer......Press any of the following keys
to answer voice calls or PushTalk:
r, d (Talk), 0 to 9, w, t, o, p,
a ( マナー ), b (voice calls), @ (PushTalk)
* You can answer a videophone call only by normal
key operations (r, d (Subst.) or
o (V.phone)).
Quick
silent......Stop the ring tone while the caller
continues to hear the ringback tone by opening the
FOMA terminal or pressing any of the following keys:
0 to 9, w, t, b, p, a (マナー ) or
o (voice calls or PushTalk)
To answer the call, press r, d (Answer/Subst.)
o (V.phone) (videophone), or @ (PushTalk).
OFF......Answer a call only by normal key
operations.
<Answer setting>
Advertisement
Table of Contents
