Table of Contents
Advertisement
Having the Caller Leave a
Message
Have the caller leave a message on your FOMA
terminal when you cannot answer a voice or
videophone call.
Each message can be up to 20 seconds long, and
5 messages can be recorded for voice calls and 2
messages can be recorded for videophone calls.
Setting Record message
i "Settings/Service"
1
"Incoming call" "Record
message" Select any item:
ON......Select Japanese 1/Japanese 2/English/
*
Voice announce 1
/Voice announce 2
OFF......Release the Record message setting.
*: Not available when no voice announcement is
recorded.
Enter the ringing time (000 to
2
120 seconds in 3 digits)
Record message is set, and "
appear on the standby screen.
N
To give priority to the "Record message" function
when "Voice Mail", "Call Forwarding" and "Record
message" are set simultaneously, set the ringing
time of Record message shorter than that of Voice
Mail and Call Forwarding.
If the mute time set for "Ring time (sec.)" is longer
than the ringing time set for Record message,
Record message activates without ringing. To
activate Record message after ringing, set the
Record message ringing time longer than the
mute time.
You can use "Ring tone/Image" (individual) to set
an answer message for each phone number and
"Ring tone/Image" (group) to set an answer
message for each group.
<Record message>
*
.
" and "
"
When "Record message" is set to
"ON" and you receive a call
Record message activates when the set time has
elapsed.
The voice caller hears the answer message, and
recording starts.
To a videophone caller, the " 伝言メモ準備中
Preparing" image is sent, the answer message is
played, the " 伝言メモ録画中 Recording" image is
sent, then recording starts.
■ When message recording starts
The recording screen appears. The caller's voice
can be heard through the FOMA terminal earpiece
during recording.
■ To answer a voice call during
recording
r
■ To answer a videophone call
during recording
Press r to answer with the
camera image or d (Subst.) to
answer with the substitute image
■ When message recording ends
The previous screen reappears
and the "Missed call" desktop
icon and "Record message"/
"Record VP message" desktop
icon appear on the standby
screen. You can check the
content by selecting one of the
desktop icons. → p.22
The number of recordings is indicated by icons in
the icon display area at the top of the screen.
-
: Record message (the number indicates
the number of messages)
/
: Record VP message (the number
indicates the number of messages)
* When Auto voice memo is set to ON, the following
icons appear but the number of messages does not:
: Record message
: Record message and Auto voice memo
N
When Manner mode is set, you cannot hear the
caller's voice during recording.
You cannot answer another call during recording.
Ex. Voice call
21
Advertisement
Table of Contents
