Table of Contents
Advertisement
■ To mute the ring tone
Press g at "Level 1"
The icon on the standby screen indicates which
items are set to "Silent".
: "Silent" is set for "Phone", "Videophone"
and/or "PushTalk"
: "Silent" is set for "Mail", "MessageR" and/or
"MessageF"
: Both "
" and "
N
The ring volume setting specified for "Phone" in
this function is also applied to the "Select ring
tone" setting for a voice call, and the alarm tones
for "Schedule" and "To Do list".
Even if the Ring volume is set to "Level 3" - "Level
6" or "Step", the ring tone is played at "Level 2" in
the following cases:
• Immediately after a voice call/videophone call
ends
• Immediately after a PushTalk call ends
• Immediately after a Record message/Voice
memo recording ends or during playback
• During/immediately after "Voice announce"
recording
Holding Incoming/Current
Calls
<Example: To put an incoming call on hold>
While ringing y
1
Three short beeps sound
and the call is put on hold.
The caller hears an
announcement that you
cannot answer now, and the
call is put on hold.
■ To put the current call
on hold
During a call t
■ To end the call during on hold/call hold
y
Press r to resume the call
2
You can also press t to resume the held call.
N
Call charges apply while an incoming call or
current call is put on hold.
18
" are set
<On hold/Holding>
Setting the hold tone
Set the announcement to be played to the caller
during on hold.
You cannot change the hold tone played during a
call.
i "Settings/Service" "Talk"
1
"Hold tone setting" "On hold
tone" Select a tone
Select "Tone 1", "Tone 2", "Voice announce 1
*
"Voice announce 2
*: Not available when no voice announcement is
recorded.
Using the Public Mode
Public mode (Driving mode/Power OFF) is an
automatic answering service provided for public
places and circumstances in which mobile phones
should not be used.
When Public mode and network services are set
concurrently, Voice Mail service
*1
service
and Caller ID Request service
precedence over Public mode.
*1: For a voice call whose ring time is not "0 second", a
service activates after the Public mode
announcement is played.
*2: When the caller notifies the caller ID, Public mode
activates.
Public mode does not work for a call from a phone
number registered for Nuisance Call Blocking.
Using Public Mode (Driving Mode)
<Public mode (Driving mode)>
When Public mode is set, a caller hears a message
that you cannot answer the call because you are
driving or in a place where you have to refrain from
using a mobile phone (on a train or bus, in a theater,
etc.), then the call ends.
Public mode can only be set or released from the
standby screen (can also be set or released when
"
" is displayed.).
You can make calls when Public mode is set.
This function is not available during data
communication.
When you receive a call with no caller ID while
Caller ID Request service is set to "Activate", the
caller ID request announcement is played (Public
mode announcement is not played.)
<Hold tone setting>
".
*1
, Call Forwarding
*2
take
*
" or
Advertisement
Table of Contents
