Table of Contents
Advertisement
Setting the Alarm for
Reconnection
When the signal quality deteriorates during a voice/
videophone call or PushTalk communication and the
call disconnects, the FOMA terminal will
automatically reconnect the call if the signal quality
quickly improves. Set the type of alarm when a call is
reconnected.
The time required for reconnection varies
depending on communication conditions or the
signal quality. It takes about 10 seconds.
i "Settings/Service" "Talk"
1
"Reconnect signal" Select an
alarm tone
Select "No tone", "High tone" or "Low tone".
N
Call charges also apply until reconnected (up to
about 10 seconds).
Making the Earpiece Sounds
Clear
This function detects ambient noise and makes the
other party's voice clear during a voice or videophone
call.
When handsfree is on or an external device such
as flat-plug earphone/microphone with switch
(optional) is connected, this function is disabled.
1
In-call screen (p.2)
p (
→
Pressing p switches the setting in the
following order: "High"
High......Activate the function even when quiet,
regardless of the ambient noise.
Low......Activate the function only when the ambient
noise is high.
OFF......Deactivate the function.
■ To set from the main menu
i "Settings/Service" "Talk" "Hyper Clear
Voice" "High", "Low" or "OFF"
N
This function changes the sound quality or
volume. Change the setting if necessary.
14
<Reconnect signal>
<Hyper Clear Voice>
→
)
→
"OFF"
→
"Low".
N
The effect may vary depending on the other
party's voice, etc.
The ambient noise detected via the microphone
activates this function. It may be activated by your
voice.
Blocking Out Ambient Noise
This function suppresses ambient noise and makes it
easier for the other party to hear you during a voice/
videophone call or PushTalk call.
i "Settings/Service" "Talk"
1
"Noise reduction" "ON" or
"OFF"
Making a Handsfree Call
While Driving
You can make or receive voice calls with handsfree
devices by connecting the FOMA terminal to
handsfree devices such as In-Car Hands-Free Kit 01
(optional) or a car navigation system.
For information on how to use the handsfree device,
refer to the manual provided with the device. The
FOMA In-Car Hands-Free Cable 01 (optional) is
required to use the In-Car Hands-Free Kit 01.
N
To operate from the handsfree device, set the
USB mode to "Communication mode".
The display and ring tones used for incoming calls
and mail follow the FOMA terminal settings.
When the handsfree device is set to emit sounds,
the ring tone comes from the handsfree device
even when in Manner mode or the Ring volume is
set to "Silent".
When the Public mode (Driving mode) is set,
operation for incoming calls and mail follows the
"Public mode (Driving mode)" settings.
When Record message is set, operation for
incoming calls follows the "Record message"
settings.
When the FOMA terminal is set to emit sounds,
operation when the FOMA terminal is folded
during a call follows "Setting when folded". When
the handsfree device is set to emit sounds, folding
the FOMA terminal does not affect the call status
regardless of the "Setting when folded" setting.
<Noise reduction>
<In-car hands-free>
Advertisement
Table of Contents
