Smeg SC361X Instructions For Installation And Use Manual page 22

Instructions for the user
7.4 Removing the door
7.4.1 Removing doors with mobile
With the door completely open, lift the levers A of the two hinges until
they touch the hinges B and take hold of the two sides of the door with
both hands close to the hinges themselves. Raise the door to an angle of
about 45° and remove it. If the hinges have not locked, repeat the
operation, raising the levers A and keeping the door slightly raised. To
reassemble, fit the hinges B into their grooves, then lower the door into
place, ensuring that it remains fitted into the grooves C, then lower the
levers A.
7.4.2 Removing doors with pins
Open the door completely and insert the pins (supplied) into the holes
from the inside. Close the door to an angle of about 45° and lift it off.
To reassemble, fit the hinges into their grooves, then lower the door into
place and extract the pins.
50