Siemens SIPROTEC 6MD61 Quick Reference Manual page 67

6MD61
– Damped Oscillations
IEC 60694, IEC 61000-4-12
EMC Tests For Noise Emission (Type Test)
Standard:
– Radio Noise Voltage to Lines,
only power supply voltage
IEC-CISPR 22
– Radio Noise Field Strength
IEC-CISPR 22
Mechanical Stress Tests
Vibration and Shock Stress During Operation
Standards:
– Vibration
IEC 60255-21-1, Class 2
IEC 60068-2-6
– Shock
IEC 60255-21-2, Class 1
IEC 60068-2-27
– Seismic Vibration
IEC 60255-21-3, Class 1
IEC 60068-3-3
C53000-B1174-C204-1
2.5 kV (Peak Value), polarity alternating
100 kHz, 1 MHz, 10 MHz and 50 MHz;
R = 200 Ω
i
EN 61000-6-3 (Generic Standard)
150 kHz to 30 MHz
Limit Class B
30 MHz to 1000 MHz
Limit Class B
IEC 60255–21 and IEC 60068–2
Sinusoidal
10 Hz to 60 Hz: ± 0.075 mm Amplitude
60 Hz to 150 Hz: 1 g acceleration
frequency sweep rate 1 Octave/min
20 cycles in 3 orthogonal axes.
Half-sine shaped
acceleration 5 g, duration 11 ms,
3 shocks in each direction of
3 orthogonal axes
Sinusoidal
1 Hz to 8 Hz ± 3.5 mm Amplitude
(horizontal axis)
1 Hz to 8 Hz: ± 1.5 mm Amplitude
(Vertical axis)
8 Hz to 35 Hz: 1 g acceleration
(horizontal axis)
8 Hz to 35 Hz: 0.5 g acceleration
(Vertical axis)
Frequency Sweep Rate 1 Octave/min
1 cycle in 3 orthogonal axes
English
67