Extraordinary Maintenance; Replacing The Light Bulb; Dismantling The Door - Smeg Oven SA1010X-5 Instruction Manual

Maintenance and cleaning

8. Extraordinary maintenance

Periodically, the oven will require small maintenance operations or the
replacement of parts subject to wear like seals, light bulbs, etc. Below
are some specific instructions for maintenance jobs of this type.
DO NOT USE A STEAM JET FOR CLEANING THE OVEN.
BEFORE PERFORMING ANY OPERATIONS REQUIRING ACCESS TO POWERED
PARTS, SWITCH OFF THE POWER SUPPLY TO THE MACHINE.
THE POWER LEAD MUST BE CHANGED BY THE MANUFACTURER OR BY AN
AUTHORISED SERVICE CENTRE TO PREVENT ANY RISKS.
8.1 R
EPLACING THE LIGHT BULB
Remove cover A by twisting anticlockwise, replace bulb B with another
similar bulb. Refit the cover A.
Only use oven bulbs (T 300 °C).
8.2 D
ISMANTLING THE DOOR
Hold the door on both sides with both hands near hinges A and raise
levers B. Lift up the door forming an angle of about 45° and remove. To
refit, slide the hinges A in the grooves, drop the door and release levers
B.
25