Prepare To Install The Range - LG LRE6327ST Installation Manual

Hide thumbs Also See for LRE6327ST:
Table of Contents

Advertisement

Available languages

Available languages

WARNING
• The information in this manual should be
followed exactly.
- A fire or electrical shock may result causing
property damage, personal injury or death.
Tip - Over Hazard
A child or adult can tip the range and be
killed. Verify the anti-tip bracket have been
installed. Ensure the anti-tip bracket is
enganged when the range is moved.
Do not operate the range without the anti-
tip bracket in place. Failure to follow these
instructions can result in death or serious
burns to children and adults.
To check visually that leveling leg is inserted
into bracket, grasp the top rear edge of the
range and carefully attempt to tilt it forward.
CAUTION
• Put on gloves during installation procedure.
- Failure to do so can result in bodily injury.
NOTE
• Read all instructions contained in these installation
instructions before installing range.
• Remove all packing materials from the oven
compartments before connecting the electrical
supply to the range.
• Observe all governing codes and ordinances.
• Be sure to leave these instructions with the
consumer.
NOTE
Keep these instructions with your owner's manual
for future reference.
• As when using any appliance generating heat, there
are certain safety precautions you should follow.
• Be sure your range is installed and grounded
properly by a qualified installer or service technician.
• Make sure the wall coverings around the range
can withstand the heat generated by the range.
• To eliminate the need to reach over the surface
elements, cabinet storage space above the
elements should be avoided.
WARNING
Leveling
bracket
leg

PREPARE TO INSTALL THE RANGE

TOOLS NEEDED
Phillips Screwdriver
Flat-blade
Screwdriver
/
" Nut Driver
1
4
Pliers
Tape Measure
Pencil
PARTS PROVIDED
Template (1)
Rear filler & 2 Screws
(LSE Series only)
Anchor Sleeves (4)
(For Anti-Tip Bracket Mounted
on Concrete Floors and Walls)
PARTS NOT PROVIDED
(UL Approved 40 or 50 AMP)
4-Wire Cord OR 3-Wire Cord
5
SAFETY
Level
Adjustable Wrench
Drill
Safety Glasses
Gloves
Anti-Tip Bracket Kit (1)
Lag Bolts (4)
Strain Relief
(For Conduit
Installations Only)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents