Harken FlatWinder 250 Installation And Maintenance Manual page 15

Refer to the following chart for wire size:
Total distance between FlatWinder
Current Under 16.4 ft Under 5 m
voltage AWG
12 V 2
24V 5
NOTICE
To connect motor, attach cable terminals to
clamps between nut and lock nut. Hold nut in
contact with motor using a spanner and tighten
other nut with second spanner. Take special care
not to turn the central spindles. Be careful not to
turn central spindles. These instructions apply
when assembling and
recommend using a torque wrench so as to obtain
a torque equal to and no greater than 10 Nm (88
in-lb).
NOTICE
Note that correct electrical contact sequence is:
Nut – Cable Terminal – Self-Locking Washer –
Lock Nut
FlatWinder 250-500
TM
16.4 - 32.8 ft 5 m - 10 m
2
mm AWG mm
32 0 50
16 3 25
disassembling. We
15
TM
and battery
32.8 - 49.2 ft 10 m - 15 m
2 2
AWG mm
00 70
2 35
Installation and Maintenance Manual
49.2 - 65.6 ft 15m - 20 m
2
AGW mm
000 95
0 50