Tools needed for FlatWInder
A number five hex key
Two number thirteen wrenches
G. Position the flange
I. Position the reduction gear and motor
Tools needed for FlatWinder
One number seventeen, two number thirteen wrenches
I. Position the reduction gear and motor
FlatWinder
250-500
TM
TM
250:
H. Tighten six M6 precote screws
(8Nm/71 in-lb)
L. Tighten the two M6 precote screws
(8Nm/71 in-lb), be sure to align the flange
TM
500:
L. Tighten the four M10 screws
(20Nm/177 in-lb)
12
Installation and Maintenance Manual