Table of Contents
Advertisement
[ IX Disassembly Procedure ]
3. Coil Assembly (thermistor, drainpan, heat exchanger)
Exercise caution when removing heavy parts.
1. Remove the Electrical, Blower and Filter panel indicated
in sections 1 and 2.
2. Remove the Coil panel by removing all of the screws se-
curing it to the (3) smaller panels for refrigerant and drain
lines.
3. Slide the smaller panels in the directions indicated and
remove.
4. Remove the (1 or 2) brackets that secure the coil, unplug
the thermistors and LEV from the control board and
route the wires out of the control box area and into the
coil section. Next, slide the coil from the frame.
HWE1405A
Fig.5
Fig.6
Fig.7
Fig.8
- 34 -
GB
Hide quick links:
Advertisement
Table of Contents
