Mitsubishi Electric CITY MULTI PVFY-P12NAMU-E Technical & Service Manual page 11

[ II Components and Functions ]
(2) Remote Controller Display
CENTRAL icon *1
Indoor temperature
Operation modes
*1
CENTRAL
Appears when one of the following local operations is prohibited: ON/OFF; operation mode; preset temperature;
fan speed; vane.
*2
For M-Series and P-Series, when an error occurs, power indicator will blink, and refrigerant address (two digits),
error code (two digits), and unit No. will blink.
For City Multi, when an error occurs, power indicator will blink, and unit address (three digits) and error code (four
digits) will blink.
Check the error status, stop the operation, and consult your dealer.
Unit address
blinks.
When only error code blinks, air conditioning units stay in operation, but an error may have occurred.
Check the error code, and consult your dealer.
*3 Preset temperature
* Centigrade or Fahrenheit is selectable. Refer to the Installation Manual for details.
HWE1405A
CHECK icon *2
Preset temperature *3
icon
icon
Set to
Room
Error code
blinks.
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Set to
Room
Error code
blinks.
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
In COOL, HEAT, or
AUTO (single set point) modes
Set to
Room
Preset
temperature
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
* All icons are displayed for explanation.
icon appears while the unit is operated in the
energy-save mode
icon appears when Operation lock setting is
effective.
icon appears when indoor unit functions are set up.
(Refer to the Installation Manual.)
Fan speed icon
Vane icon
icon appears when the power is on.
In AUTO (dual set point) or
SETBACK modes
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
- 4 -
Cooling preset
temperature
Heating preset
temperature
GB