Yamaha PW45 Original Instructions Manual page 87

INSTRUMENT AND CONTROL FUNCTIONS
TIP
The maximum speed will vary depending on the selected
gear. The maximum speed will become slower in a lower
gear.
Even if you release the running assist switch while the
function is being used, the running assist indicator will re-
main on the display for five seconds.
When you press and hold the running assist switch again
while the indicator is lit, the running assist function will be
available.
2 Clock and km/mile settings
Use the following steps to set the time and km/mile settings.
1. Make sure that the display is mounted on the display
holder, and that the display unit is turned off.
2. Press the power switch while holding the function se-
lect switch.
3. When the "hour" on the clock begins to flash, release
the switches.
4. Use the assist mode switches (up & down) to set the
"hour".
5. Press the function select switch, and the "minutes" on
the clock will begin to flash.
6. Use the assist mode switches (up & down) to set the
"hour".
18
English - 67