General Safety Instructions - LaserLiner DistanceMaster Home Manual

General safety instructions

– Attention: Do not look into the direct or reflected beam.
– The laser may not get into the hands of children!
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must only be used in accordance with its intended purpose
and within the scope of the specifications. Modifications or changes to
the device are not permitted, this will otherwise invalidate the approval
and safety specifications.
Switch on, measure and switch off:
device on
1x
Change unit of measure:
m / ft / inch / _' _"
3 sec
Change measurement point (reference):
Change measurement function:
length
(device on)
1x
12
GB
Do not stare into the beam!
laser on
2x
1 sec
rear (device on)
1x
1 sec
area
1 sec
1x
Laser radiation!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2007-10
measure
3x
Delete the last
measured value:
pin
1x
area
addition
2x
device off
3 sec
1x
front
2x
volume Pythagoras
3x 4x
1+2
5x