Table of Contents
Advertisement
Quick Links
BariVest
Manual - English
SystemRoMedic
TM
SWL: 570 kg/1250 lbs
BariVest is a lift vest that has been design as an aid to gait training for patients weighing 180 kg or more. It can be used
with both mobile and stationary lifts, with a four-point slingbar or with BariTurn. BariVest features a back section, a front
section and a narrower section in the middle to enable comfortable fit in the crotch area. It has two slingbar loops, both
front and back, as well as belts at three levels.
SystemRoMedic includes a wide range of functional, comfortable, high-quality slings that can be adapted for different
types of lifting and for patients with different needs. The slings are available in several different materials and sizes. All
models are safe and very easy to use. The choice of model and material depends on the patient's needs and the transfer
situation.
Functional inspection
Visual and mechanical inspection
Check the condition and function of the sling regularly. Always inspect the product after laundering. Check to ensure that
seams and material are free from damage. Check to ensure that fabric is not worn or faded. Apply load to the device
and check to ensure that clasps, handles, etc. withstand heavy load. If there are signs of wear, the product must be
discarded.
Always read the manual
Always read the manuals for all assistive devices used during a transfer.
Keep the manual where it is accessible to users of the product.
Do not leave the patient unattended during a transfer situation.
To prevent discomfort and the risk of the patient sliding out of the sling, trial fit the sling carefully. First, apply the sling's
back loops to the slingbar, and then apply the leg support loops. Use a slingbar that has been tested.
The lowest allowable safe working load always determines the safe working load of the assembled system. Always
check the safe working loads for the lift and accessories before use. Contact your dealer if you have any questions.
Manual no: 00779 En Ver. 4 110310
Advertisement
Table of Contents
Related Manuals for Handicare SystemRoMedic BariVest XXXL
Summary of Contents for Handicare SystemRoMedic BariVest XXXL
- Page 1 BariVest Manual - English SystemRoMedic SWL: 570 kg/1250 lbs BariVest is a lift vest that has been design as an aid to gait training for patients weighing 180 kg or more. It can be used with both mobile and stationary lifts, with a four-point slingbar or with BariTurn. BariVest features a back section, a front section and a narrower section in the middle to enable comfortable fit in the crotch area.
- Page 2 BariVest product description BariVest features a back section, a front section and a narrower section in the middle to enable comfortable fit in the crotch area. It has two slingbar loops, both front and back, all of which are hooked to the slingbar/slingbars. There are belts at three levels The upper belt is secured with clasps on each side at the front for easy adjustment, and the two lower belts have a clasp that is...
- Page 3 Rising to a standing position Application of the four-point slingbar: For raising the patient to a standing position using a mobile lift or stationary lift unit, use of a four-point slingbar is recommended. First, apply the rear loops to the wider side of the slingbar, and then the front loops to the narrower side.
- Page 4 Removing BariVest Seated position at the bedside: Lower the patient to the edge of the bed and disconnect the loops from the slingbar. Allow the front section to hang down between the patient’s legs. The patient leans first to one side of the bed, so that the BariVest can be tucked under the seat.
Need help?
Do you have a question about the SystemRoMedic BariVest XXXL and is the answer not in the manual?
Questions and answers