Di2 Adapter B Installation Instructions - Shimano DI2 Adapter B Dealer's Manual

INSTALLATION

DI2 Adapter B Installation Instructions

„ DI2 Adapter B Installation Instructions
When Installing from the Bottom Bracket
(A)
1
(C)
2
3
4
To be continued on next page
(B)
Pass the BOSCH Y-harness (B) through
the guide (A).
Connect the electric wires (C) to the DI2
Adapter B (D).
(D)
Open up the slit of the guide and pass
the electric wires through it.
Connect the BOSCH Y-harness to the DI2
Adapter B and install the guide.
9
(A)
Guide
(B)
BOSCH Y-harness
(C)
Electric wires EW-SD50
(D)
DI2 Adapter B EW-EX010
NOTE
Be sure to install the guide.
If the guide is not installed, the weight of the
DI2 Adapter B imposes a stress on the BOSCH
Y-harness, and there is a possibility of wires
breaking or damaging the connector.