Setting The Clock - A&D HV-C Series Instruction Manual

13.2. Setting the Clock

The clock can only be set for built-in printer models (Type CP).
Step 1 Turn off the display.
While pressing and holding the TARE key, press the
ON/OFF key to turn the display on and enter function
setting mode.
Step 2 Press the MODE key several times to display
.
Step 3 Press the ENTER key to enter date confirmation mode.
To set the time without changing the date, press the
MODE key.
- Date setting mode -
Step 4 Press the ENTER key to enter date setting mode.
Set the date using the following keys.
1M+ key
PRINT key
Numerical keys A value can be input at the blinking digit
1ZERO key
Step 5 Press the ENTER key after finishing setting. A setting
value is registered, and the scale proceeds to time
confirmation mode after displaying
To return to date confirmation mode, press the MODE key.
-Time setting mode -
Step 6 Press the ENTER key to enter time setting mode.
Set time using the following keys.
1M+ key
PRINT key
Numerical keys A value can be input at the blinking digit
1ZERO key
Step 7 Press the ENTER key after finishing setting to register
the set value. The scale displays
displaying
Step 8 Press the 1ON/OFF key to turn the display off or
press the 1ZERO key.
appears.
The blinking digit is moved to the left
The blinking digit is moved to the right
To cancel settings and proceed to step 5.
The blinking digit is moved to the left
The blinking digit is moved to the right
To cancel settings and proceed to step 7.
.
.
after
Page 42
Press several times
Date
Use corresponding keys
Time
Use corresponding keys
HV/HW-C/CP Series