Viewing Images On A Tv Using An Hdmi Cable; "Bravia" Sync - Sony DSC-RX10M4 Help Manual

Help Guide
Digital Still Camera
DSC-RX10M4

Viewing images on a TV using an HDMI cable

To view images stored on this product using a TV, an HDMI cable (sold separately) and an HD TV equipped with an
HDMI jack are required.
Turn off both this product and the TV.
1
Connect the HDMI micro terminal of this product to the HDMI jack of the TV using an HDMI cable (sold
2
separately).
Turn on the TV and switch the input.
3
Turn on this product.
4
Images shot with the product appear on the TV screen.
Select an image using the right/left sides of the control wheel.
5
The monitor of this camera is not lit up on the playback screen.
If the playback screen is not displayed, press the

"BRAVIA" Sync

By connecting this product to a TV that supports "BRAVIA" Sync using an HDMI cable (sold separately), you can operate
this product's playback functions with the TV remote control.
1.
After performing the steps above to connect this camera to a TV, select MENU →
[CTRL FOR HDMI] → [On].
2.
Press the SYNC MENU button on the TV remote control, and select the desired mode.
If you connect this camera to a TV using an HDMI cable, available menu items are limited.
Only TVs that support "BRAVIA" Sync can provide SYNC MENU operations. For details, refer to the operating
instructions supplied with the TV.
(Playback) button.
265
(Setup) → [HDMI Settings] →