Exposure Std. Adjust - Sony DSC-RX10M4 Help Manual

Help Guide
Digital Still Camera
DSC-RX10M4

Exposure Std. Adjust

Adjusts this camera's standard for the correct exposure value for each metering mode.
MENU → (Camera Settings1) → [Exposure Std. Adjust] → desired metering mode.
1
Select the desired value as the metering standard.
2
You can set a value from -1 EV to +1 EV in 1/6 EV increments.
Metering Mode
The set standard value will be applied when you select the corresponding metering mode in MENU →
Settings1) → [Metering Mode].
Multi/ Center/
Note
The exposure compensation will not be affected when [Exposure Std. Adjust] is changed.
The exposure value will be locked according to the value set for [
The standard value for M.M (Metered Manual) will be changed according to the value set in [Exposure Std. Adjust].
The value set in [Exposure Std. Adjust] is recorded in Exif data separately from the exposure compensation value. The amount of
exposure standard value will not be added to the exposure compensation value.
If you set [Exposure Std. Adjust] during bracketing shooting, the number of shots for the bracketing will be reset.
Related Topic
Metering Mode
Spot/ Entire Screen Avg./
4-725-901-11(2) Copyright 2017 Sony Corporation
Highlight
Spot] during using spot AEL.
158
(Camera