Manual Exposure - Sony DSC-RX10M4 Help Manual

Help Guide
Digital Still Camera
DSC-RX10M4

Manual Exposure

You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture.
Set the mode dial to M (Manual Exposure).
1
Select the desired aperture value by turning the aperture ring.
2
Select the desired shutter speed by turning the control dial.
You can also set [ISO] to [ISO AUTO] in manual exposure mode. The ISO value automatically changes to
achieve the appropriate exposure using the aperture value and shutter speed you have set.
When [ISO] is set to [ISO AUTO], the ISO value indicator will blink if the value you have set is not suitable for
appropriate exposure. If this happens, change the shutter speed or aperture value.
When [ISO] is set to other than [ISO AUTO], use MM (Metered Manual)* to check the exposure value.
Toward +: Images become brighter.
Toward -: Images become darker.
0: Appropriate exposure analyzed by the product.
*
Indicates under/over for appropriate exposure. It is displayed using a numerical value on the monitor and with a metering indicator on
the viewfinder.
Adjust the focus and shoot the subject.
3
Hint
You can change the shutter speed and aperture (F-value) combination without changing the set exposure value by rotating the
aperture ring while pressing the AEL button. (Manual shift)
Note
The Metered Manual indicator does not appear when [ISO] is set to [ISO AUTO].
When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes.
The SteadyShot warning indicator does not appear in manual exposure mode.
The brightness of the image on the screen may differ from the actual image being shot.
4-725-901-11(2) Copyright 2017 Sony Corporation
137