Sony DSC-RX10M4 Help Manual page 160

Help Guide
Digital Still Camera
DSC-RX10M4
Zebra
The zebra pattern will appear over part of an image if the brightness level of that part meets the IRE level that you set.
Use this zebra pattern as a guide to adjust the brightness.
MENU → (Camera Settings2) → [Zebra] → desired setting.
1
Menu item details
Off:
Does not display the zebra pattern.
70/75/80/85/90/95/100/100+/Custom1/Custom2:
Adjusts the brightness level.
Hint
You can register values to check the correct exposure or overexposure as well as the brightness level for [Zebra]. The settings for
correct exposure confirmation and overexposure confirmation are registered to [Custom1] and [Custom2] respectively in the
default settings.
To check the correct exposure, set a standard value and the range for the brightness level. The zebra pattern will appear on
areas that fall within the range you set.
To check the overexposure, set a minimum value for the brightness level. The zebra pattern will appear over areas with a
brightness level equal to or higher than the value you set.
Note
The zebra pattern is not displayed on devices connected via HDMI.
4-725-901-11(2) Copyright 2017 Sony Corporation
160