Table of Contents
Advertisement
The final screen displayed is the hours until
transmission oil maintenance is required. If the
service is not performed, the time is recorded as
negative hours to indicate the number of hours past
due for the service (up to -500 hours).
Maintenance Reminder Screens
The hour meter displays the number of engine
hours until either the engine oil or transmission oil
maintenance is due. The reminder flashes and the
LED displays a steady red light.
An alert occurs when the hour counter reaches zero.
If the service is not performed, the time is recorded
as negative hours to indicate the number of hours
past due for the service (up to -500 hours) (reference
Figure 16
and
Figure
17). The hour meter switches
between the default screen and the active alert
screen. If more than 1 alert is active, the display
cycles between the alerts in the order that they
occurred before cycling back to the default screen.
The alerts only display when the default screen has
been active for 2 seconds; however if the key is moved
to the S
position, the alerts occur immediately.
TART
When the machine is aerating, the alert screen does
not display but the LED status light remains a steady
red.
There are two maintenance reminders:
1.
Service Engine
The engine-oil service reminder counts down
from the initial break-in service interval of 5
Figure 14
Figure 15
engine hours and then counts down from 100
hours for each service interval thereafter.
g212117
2.
Service Transmission
The transmission oil maintenance reminder
counts down from the initial break-in service
interval of 250 engine hours and then counts
down from 500 hours for each service interval
thereafter.
g212118
You can reset maintenance reminders manually.
•
You can enter the engine service reminder reset
mode by cycling the key switch between the R
position and the O
seconds with the parking brake engaged.
When the Service Engine screen displays
and flashes, you can reset the engine-oil
maintenance reminder by pressing the down on
the multi-function switch. Once the reminder
resets, the screen exits the Service Engine
screen and returns to the default screen.
You can exit the Service Engine screen at any
time by turning the key to either the O
S
position.
TART
•
You can enter the transmission-oil maintenance
reminder reset mode by cycling the key switch
from the R
UN
to the R
UN
the parking brake engaged.
When the Service Transmission screen displays
and flashes, you can reset the transmission-oil
19
Figure 16
Figure 17
position 4 times within 8
FF
position to the O
position and back
FF
position, 6 times within 8 seconds, with
g030960
g030965
UN
or the
FF
Advertisement
Table of Contents
