Usb-c docking station with dual 4k displays 80w pd for windows computers (16 pages)
Summary of Contents for cable matters 107004
Page 1
Thunderbolt™ 3 Dock Model 107004 Install the Thunderbolt™ certified driver BEFORE connecting the Thunderbolt Dock. Download at: www.cablematters.com/downloads Thunderbolt™ 3 The USB-C that does it all User Manual Email: support@cablematters.com...
1.2 Copyright and Trademarks Specifications are subject to change without notice. Cable Matters is a registered trademark or trade- mark of Cable Matters Inc. All rights reserved. All other trademarks are the property of their respective owners. Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation in the U.S. and/or other countries.
Thunderbolt™ 3 Dock 2.2 Product Description The Cable Matters® Thunderbolt™ 3 Dock supports two 4K displays, USB peripherals, and Gigabit Ethernet networking over a single Thunderbolt 3 40 Gbps cable. Connect legacy USB and DisplayPort devices to the latest release computers with Thunderbolt and provide 15 watts of bus-power to each Thunderbolt device.
Thunderbolt™ 3 Dock 2.4 System Requirements Computer Thunderbolt™ 3 equipped port with latest drivers Thunderbolt 3 Device Thunderbolt™ 3 cable or display adapter Supported OS Windows 7.1 or higher with drivers for the Dock External Display: DisplayPort input port and a DisplayPort Cable Gigabit Network: LAN or router with an RJ45 Port Cat 6 Ethernet cable (recommended)
Thunderbolt™ 3 Dock 3.2 Panel Diagram 1) Gigabit Ethernet Network port 2) USB 3.0 port to attach USB 3.0/2.0 peripherals 3) Mono Microphone Line-In 4) Audio Stereo Headset/Headset Line Out 5) Thunderbolt 3 (see Note) 6) Thunderbolt 3 (see Note) Note: The Thunderbolt 3 ports are symmetrical.
Thunderbolt™ 3 Dock 3.3 Connecting the Thunderbolt Dock 1) Connect the Dock to an AC power outlet or the Dock will not operate 2) Connect the included Thunderbolt 3 (USB-C) cable to either Thunderbolt 3 port on the dock to any Thunderbolt 3 port on the computer. Note: A Thunderbolt 3™...
Thunderbolt™ 3 Dock 3.4 Connecting to a LAN or Router 1) Connect an RJ45 patch cable to the Dock (Cat 6 recommended) 2) Connect the patch cable to a LAN or router port 3) Check the documentation of your LAN or router to configure network access 4) Link and Status LED’s should blink to indicate a live connection Note: The Gigabit Ethernet function requires a Windows driver.
Thunderbolt™ 3 Dock 3.6 Connecting Audio Devices 1) Connect an external 3.5mm mono microphone to the Audio In Port 2) Connect a stereo headset or external speakers to the Audio Out Port Note: Configure the audio settings from the computer: Search Control Panel >...
Thunderbolt™ 3 Dock 3.8 Connecting Thunderbolt Devices 1) Connect the host to a Thunderbolt 3 port 2) Connect a display adapter or a Thunderbolt device to the other port Notes: Supports USB Power Delivery (PD) 2.0 to deliver 15 watts to bus powered Thunderbolt devices ...
Email us with any questions at support@cablematters.com. 5.2 Warranty Information This product is backed by a limited one-year warranty. The warranty covers parts and labor costs only. Cable Matters does not warrant its products from defects or damages arising from misuse, abuse, or normal wear.
Page 12
Thunderbolt™ 3 Dock MPORTANT HUNDERBOLT OCK NOTES Download the Windows drivers before connecting the Dock: www.cablematters.com/downloads The Dock must be connected with a Thunderbolt 3 cable (40 Gbps is required for maximum performance). Thunderbolt devices and displays MUST be connected with a Thunderbolt cable. ...