Related Manuals for cable matters 202014
Summary of Contents for cable matters 202014
- Page 1 USB 3.0 to Dual SATA Hard Drive Docking Station with Standalone Clone Function Model 202014 User Manual (Available in a PDF file) Email: support@cablematters.com...
-
Page 2: Table Of Contents
Dual-SATA Docking Station with Cloning Table of Contents 1. INTRODUCTION………………………………………….…...1 1.1 Introduction 1.2 Copyright and Trademarks 1.3 FCC Compliance Statement 2. PRODUCT OVERVIEW 2.1 Package Contents 2.2 Product Description………………………………………………...2 2.3 Product Features 2.4 System Requirements 3. CONNECTION AND OPERATING INSTRUCTIONS ……...3 3.1 Diagram of connections 3.2 HDD Installation - USB Cable Mode …………..……………...….4 3.3 Formatting an HDD in Windows OS…………………………...….5... -
Page 3: Introduction
1.2 Copyright and Trademarks Specifications are subject to change without notice. Cable Matters is a registered trademark or trademark of Cable Matters Inc. All rights reserved. All other trademarks are the property of their respective owners. 1.3 FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 4: Product Description
Dual-SATA Docking Station with Cloning 2.2 Product Description The Cable Matters® Dual-Bay Dock & Clone Station supports 2.5” or 3.5” Hard Disk or Solid State SATA I/II/II drives without any tools or software drivers. Connect it to your computer or laptop for fast file transfers, data recovery or drive imaging at SuperSpeed USB 3.0 data transfer rates. -
Page 5: Connection And Operating Instructions
Dual-SATA Docking Station with Cloning 3. Connection and Operating Instructions 3.1 Diagram of Connections DOCK REAR PANEL 1. SuperSpeed USB 3.0 Type-B port 2. DC 12v Power Adapter input 3. Power ON/OFF button DOCK TOP PANEL Hold both the Dock 1. -
Page 6: Hdd Installation - Usb Cable Mode
Dual-SATA Docking Station with Cloning 3.2 HDD Installation - USB Cable Mode 1. Connect the Dual-Bay Dock to the AC power adapter and an electrical outlet. Check that the green LED is lit on the adapter. 2. Connect the USB cable from your computer to the Dock. 3. -
Page 7: Formatting An Hdd In Windows Os
Dual-SATA Docking Station with Cloning 3.3 Formatting an HDD in Windows OS Insert the drive into either Bay A or B and turn on the Dock Check that the yellow LED is lit for the Bay Open the Disk Management Menu in Windows Create and format hard Search for: disk partitions... - Page 8 Dual-SATA Docking Station with Cloning Use the Simple Volume Wizard to perform the following functions: * Partition a drive * Format a drive * Change the drive letter * Shrink a partition * Delete a partition * Change a drive file system type Initialize the drive, if prompted (see Page 5) Right-Click on the unallocated drive and select New Simple Volume Follow the instructions from the New Simple Volume Wizard...
-
Page 9: Formatting An Hdd In Mac Os
Dual-SATA Docking Station with Cloning 3.4 Formatting an HDD Formatting in Mac OS Insert the drive into either Bay A or B and turn on the Dock Check that the yellow LED is lit for the Bay Initialize the drive, if prompted Open Utilities >... -
Page 10: Hdd Duplication - Cloning Mode
Dual-SATA Docking Station with Cloning 3.5 HDD Duplication - Cloning Mode (Standalone) 1) Connect the Dock to the AC power adapter and an Do NOT connect electrical outlet. Check that the green LED is lit on the the USB cable power adapter. -
Page 11: Troubleshooting Notes
Dual-SATA Docking Station with Cloning 3.6 Troubleshooting Notes No Power: Check for the power adapter green LED. Press the ON/OFF button. Cannot read the HDD in USB Mode: Ensure that the HDD is properly seated and the yellow Bay LED is lit Unable to start Cloning: Target Bay B must have equal or greater storage capacity than Source Bay A. -
Page 12: Technical Specifications
Note: Specifications are subject to change without notice 5. Warranty and Support 5.1 Customer Support and Contact Information Cable Matters offers lifetime technical support as an integral part of our commitment to provide industry leading solutions. Email us with any questions at support@cablematters.com.