Fitting; Connections - Honeywell ICON 100 SERIES User Manual

ICON 100 SERIES USER GUIDE
EN2B-0002UK07 R0404
lcon is supplied in a panel-mount enclosure. While fitting the controller we
recommend to leave enough room at the back in order to avoid compressing or
excessively bending the cables. Overall instrument size and panel cut-out
dimensions are given in the Fig. 1. below.
We recommend the use of wire gauges adequate for the given load power ratings in
order to avoid damage to the screw connector.
ICON-111S/SR Models
8
Fig. 1. Fitting Icon

4.7. Connections

Fig. 2. Icon 111S/SR Electrical Connections

4.6. Fitting