Konica Minolta bizhub 3602P User Manual page 39

Understanding the printer menus
Menu item
Speed, Duplex
IPv4
All IPv6 Addresses
Reset Print Server
Start
Network Job Timeout
Off
On* (90 seconds)
Banner Page
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Wireless
Note: This menu is available only in printers connected to a wireless network.
Menu item
Setup On Printer Panel
Choose Network
Add Wi-Fi Network
Network Name
Network Mode
Infrastructure*
Ad hoc
Wireless Security Mode
Disabled*
WEP
WPA2/WPA - Personal
WPA2 - Personal
Wi‑Fi Protected Setup
Start Push Button Method
Start PIN Method
Description
Show the speed of the currently active network card.
Show the IPv4 address.
Show all IPv6 addresses.
Reset all active network connections to the printer.
Note: This setting removes all network configuration settings.
Set the time before the printer cancels a network print job.
Print a banner page.
Description
Configure the wireless connection using the control panel.
Establish a wireless network and enable network security.
Notes:
•
Start Push-Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given period of time.
•
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings
of the access point.
39