Table of Contents
Advertisement
To turn Demo Mode on, touch
System
GPS
>
>
Connecting Your Dakota
to a Computer
You can connect the Dakota to your
computer using the supplied USB
cable.
To connect your Dakota to your
computer:
1. Lift the weather cap on the bottom
of the Dakota.
2. Insert the smaller connector on
the USB cable into the USB mini-
B jack.
3. Connect the other end of the
cable to a USB port on your
computer.
Dakota Series Owner's Manual
190-01069-00_0A.indd 33
Setup
Demo
Mode.
>
Installing a microSD
Card
The Dakota microSD data card tray
is located beneath the AA batteries.
Purchase microSD cards from an
electronics supplier or purchase
preloaded MapSource
®
data cards from your Garmin dealer.
Go to
http://buy.garmin.com
for compatible
map products.
To install or remove a microSD
card:
1. Lift the latch on the back of the
Dakota
(page
2) and remove the
battery cover and the batteries.
2. Lift the metal cover.
3. Push the card into the microSD
card tray and close the metal
cover.
Appendix
™
detailed map
4/17/2009 1:19:11 PM
Advertisement
Table of Contents
