Lowtech Studios slither.io Operator's Manual page 32

Problem
Game does not load.
PC Drive test reports "bad" or
"missing" files.
Game fails to finish loading.
After resetting, game still
reports an error.
Erratic game mode or attract
mode.
WARNING!
Data files Corrupted.
(Game Operation May Become
Unstable.)
Use "Test" Switch to Enter Test
Mode and Run "File Test."
Game Resets.
Coin meter does not click
during test.
Dongle Not Present.
Improper number of credits
given when coins or bills are
inserted.
slither.io
Possible Cause
PC hard drive failure.
Bad file.
Faulty meter.
Blown fuse(s) on PCB.
No pulse to meter.
Dongle missing or disconnected.
Faulty USB port.
Incorrect setting in Pricing
Adjustments.
Faulty wiring.
Faulty coin mech.
TM
Recover hard drive.
See Flash Installer Document or
contact your distributor for the
latest software revision.
Run Flash Installer.
Replace coin meter.
Replace 12VDC fuse(s) in
cabinet.
Check wiring from meter to PCB
board.
Find dongle cable and reseat in
USB port.
Insert dongle cable in different
USB port.
Adjust pricing settings.
Disconnect cabinet from AC
power. Verify wires are firmly
connected to coin mech and bill
validator and ground wires are
properly connected. Verify no
wires are frayed or shorting to
ground.
Verify coin mech is not jammed.
Ensure coin mech is properly
aligned and latched to coin
door.
Solution
32| P a g e