Smeg LSA4551B Instruction Manual page 8

User instructions
ADJUSTING THE WATER SOFTENING SYSTEM
The dishwasher is equipped with an device for the user to adjust the water softening system
according to the hardness of the water supply.
The setting switch is inside the plastic locking ring located on the right-hand side, inside the
dishwasher.
WATER HARDNESS TABLE
WATER HARDNESS
German Degrees (°dH)
0 - 4
5 - 15
16 - 23
24 - 31
32 - 47
48 - 58
Contact your local water board for information on the hardness of your water supply.
REMOVING THE DISHES
At the end of the washing program, wait at least 20 minutes before removing the dishes, to allow
them to cool down. To prevent any water droplets on the upper basket from falling on the dishes in
the lower basket, it is advisable to unload the lower basket first, and then the upper basket.
French Degrees (°dF)
0 - 7
8 - 25
26 - 40
41 - 60
61 - 80
81 - 100
SETTING
Setting N. 1 NO SALT
Setting N. 1
Setting N. 2
Setting N. 3
Setting N. 4
Setting N. 5
17