Advertisement
DCF6043
5.
DCU62G2
DCF6G51
DCF6057
DCF6964
DCF6Z65
DCF6066
SECTION XVIII
Configuring Original DN6616/6624/6632 FNPs
PSA
(peripheral subsystem interface adapter)
for
DCP6616.
Provides channel
in DCP6616 for direct
link to MSP.
Required
if NPS is used.
Can also
be used to provide a second PSA for DN6632.
No
NPS support of 2 PSAs concurrently. New NPS
bootload required. See Section XII.K.
GPCB options
(LIUs in GPCB are known officially as
CCIs -
communication channel
interfaces).
Third GPCB in DCP6632.
Equipped to handle l-16
LIUs for a maximum of 16-32 lines. No LIUs are
included but must be configured for all line
terminations.
Multi-function LIUs — at least one should be
configured,
if possible, per FNP for greatest
flexibility.
Terminates 2 lines.
EIARSZBZC interface. Any code
5-8 bits. HDX or FDX.
Synchronous
(to 9600 bits
per second)
or asynchronous
(to 24$0 bits per
second).
Either line can be used either way. On
"As Available"
status.
Same as DCF6051 except ACU is included to support
one of the two data lines.
ACU support requires
NPS. On "As Available" status.
Terminates 2 lines.
EIARSZ32C interface. Any code
5—8
bits.
HDX or
FDX.
Synchronous to 9,6@@
bps or
isochronous to 9,6flfl bps.
Asynchronous to 2,490
bps.
Each line can run at different speed and
with different transmission technique -
synchronous, asynchronous,
isochronous.
Isochronous allows use of standard synchronous
modems with asynchronous terminals above 2,40%
bps.
Same as DCF6G64 except provides Military Standard
188C interface.
Same as DCF6066 except that ACU is included to
support one of the lines.
ACU support requires
NPS.
166
DH92.
Rev.
0
Advertisement
