Download Print this page

Honeywell 66 Configuration Manuals page 213

Advertisement

SECTION XX
Configuring Level 6-Based FNPs
(Not DN6600-1)
66/05 INP, DN6670, DPS INP/ANP
DCF6624
DCF6625
DCF6927
Direct connect feature for connection to
asynchronous LIU for one line
(cable).
Length of
cable determined by maximum cable length of
terminal subsystem. One per line
(cable). No
inherent speed limit.
Same as DCF6624 except for synchronous LIU.
Maximum speed 9,600 bps.
Universal Modem Bypass feature for connection to
one synchronous or asynchronous line
(cable). A
Level 6 feature usable into FNP LIUs.
Minimum of
two
per
line,
one at
FNP end,
other at terminal
end.
Maximum cable length between 2 successive
bypass units is 2500 feet. Intermediate bypass
units can be used as line signal
repeaters or
strengtheners. Check your Level 6 technical
support people for maximum cable lengths and
maximum number of bypass units in a line at
satisfactory line noise levels.
Speed to 9,600
bps. Cannot be used with current loop LIUs.
Note: Current loop—oriented terminals
cable—connect directly to a current loop—oriented
LIU.
Up to 1000 cable feet.
13.
Console Subsystems for Level 6—based FNPs
a.
For 66/05 CPS6058
INP and DN6670
(DCP6678)
no
console is included
in FNP price but a console
must be ordered
for each such FNP:
1)
DCF6606 - heavy duty console required for use
with NPS.
Applies to DN6670 since "Integrated
FNP" with CPS6058 66/05 does not support NPS.
208
DH92.
Rev.
0

Advertisement

loading

This manual is also suitable for:

66/dps