Advertisement
SECTION IV
Configuring Within IOM
b.
Use
fewer
simultaneous channels and/or
switched
paths.
c.
Use fewer subsystems of same type.
d.
Use fewer subsystems.
e.
Use different mix of subsystems.
f.
Change the Level 66 model you are bidding.
(freestanding)
instead of URP0602
(in IOM
cabinet).
Don't forget the impact when the total memory size is
greater than 256KW/1024KB.
Know your
prospect/customer growth plans. Don't be surprised
yourself, and even worse, don't let the
prospect/customer be surprised.
Determine next the logical channels or data paths
which must be assigned to each physical channel and
switched path, and the quantity which may optionally
be assigned. See Section F below.
35
DH92.
Rev.
0
Advertisement
