Kinetico RO-Compact Series Installation And User Manual page 4

Plumbing:
The water connections for the RO-unit must meet the requirements of all
present regulations
!
The RO-unit must be connected to the cold water supply (max 25
Install a water shut-off valve and a water meter in the raw water inlet.
Maximum hardness of inlet water 25
The water inlet must be sufficiently large (at least ½")



We recommend the installation of a pressure gauge before the RO-unit to be
able to monitor the water pressure.
To protect the RO-unit from dirt the enclosed ¾" micro filter must be
installed between the inlet hose and the inlet of the RO-unit.
!
This micro filter must be removed and cleaned every 6th month at a minimum
or if the plumbing of the building is being repaired.

The raw water meets all requirements of present regulations

Correctly connected to cold water

Diameter of inlet hose is ½" at least

Install the filter strainer before the RO-unit

Maximum hardness of inlet water 25
o
dh .( compact 1)
o
10 dh .( compact 2 & 3)
o
dh .( compact1)
o
10 dh .( compact 2 & 3)
o
).
4